HJC RPHA 11 Pro Venom 2 HelmetALERT!!! THE HJC VENOM 2 HELMET IS IN, but availability is extremly limited. ALL SIZES ARE BACK IN STOCK!
The HJC RPHA-11 Pro Venom 2 helmet is HJC 's premier helmet line. The RPHA series is designed for high performance with HJC 's Premium Integrated Matrix (P.I.M) construction. The P.I.M. construction is a woven blend of Carbon fiber, Fiberglass epoxy, Aramid epoxy, and Organic fibers that is incredibly strong and light. These P.I.M materials are hand-laid by RPHA certified technicians, into special pre-molds for shaping which virtually eliminates resin buildup that is typically found in automated production.
Most riders have had a helmet that feels like a billboard when you get it into the wind, but the RPHA-11 Pro series like the Venom 2 helmet, was CAD designed for rapid proto type which allowed for extensive wind tunnel testing. The result is the HJC Venom 2 helmet is optimized for air flow around the helmet providing the rider with a smooth, quiet and well vented riding experience.
Special considerations have been made for the Venom 2 helmet interior. The redesigned plush pads and self-cooling properties reduce pressure points and make it a helmet that is comfortable all day long. The antibacterial Polygiene infused silver chloride pads are completely removable, washable and replaceable, keeping your HJC helmet nice and fresh. The HJC Venom 2 helmet also has recessed speaker pockets with removable ear pocket pads, plus cheek pads are interchangeable in all sizes.
Safety was also a design goal and why HJC did not settle for the standard D.O.T. rating, but also obtained the privately tested ECE rating.
The HJC designers are very proud and confident of their RPHA-11 Pro Venom 2 helmet, so they topped off the design with a 5 year limited warranty.
HJC helmets like the RPHA-11 Pro Venom 2 helmet push the envelope on comfort, design, safety, graphics and warranty. It is not hard to see why HJC helmets are #1 in the world in helmet manufacturing.
HJC RPHA-11 Pro Venom 2 Helmet Specifications
- 5 Year Limited Warranty
- Weight: SM 3.11 lbs., MD to LG 3.21 lbs., and XL to 2XL - 3.34 lbs.
- ECE and D.O.T. approved
- Premium Integrated Matrix Plus (PIM Plus) Construction
- Emergency Helmet Release
- Dual Shield Lock System
- RapidFire II Shield Replacement System
- ACS - Advanced Channeling Ventilation System for superior air flow
- Max Air-Flow Top Vent
- Multi-Cool - Wicking interior pads w/ Polygine Infused Silver Technology
- Eyewear Friendly EPS Shape - Special channel built in
- HJ-26 Clear Optically-Superior 2D flat-Racing Shield installed
- HJP Optional Dark Smoke Shield is Included in box
RPHA-11 Pro Owners Manual
HJC Helmet Size Chart for RPHA Helmets
(Not all sizes available for all models)
JOE ROCKET ADULT GLOVES (Men and Women)
(Not all sizes available for all gloves)
HJC Helmet Fitting Instructions
Never buy a used helmet or borrow someone else's helmet. Over time the protective foam in helmets will adjust to the contours of a user's head. A used or borrowed helmet may not offer as much protection as a new helmet.
Wearing the wrong size helmet can increase your risk of serious injury or death in an accident. A helmet that is too large for your head may be dislodged or knocked off in an accident. To select the right size helmet for your head, follow these instructions:
- Measure your head. Wrap a tape measure around your head about one inch (2.5 cm) above your eyebrows.
- Use the sizing chart to select the helmet size that corresponds most closely to your head measurement. If your head size falls between two helmet sizes, try on the larger helmet first and then the smaller size. Click here to see the sizing chart.
- Try on the helmet by grasping both chin straps to pull the helmet completely onto your head, ensuring that the top of your head is in contact with the top of the helmet interior.
- Check for a proper fit. To make sure your helmet is the right size, check that:
- The helmet inner lining fits snugly around your head.
- The top pad presses firmly on your head.
- The cheek pads contact your cheeks.
- There is no space around your brow under the inner lining.
- Test this by trying to insert your fingers. If the helmet does not fit snugly, try on a smaller size.
- Check your field of vision when trying on a helmet. Some helmets may obstruct or block your vision when looking left, right, up, or down.
Always make sure you can see well enough to safely operate your motorcycle.
- Test the helmet fit by placing your hands on each side of the helmet. While holding your head as motionless as possible, try rotating your helmet from left to right then up and down. If you can feel the helmet padding sliding on your head, it is too big, try a size smaller. You should feel the helmet move the skin on your head and face as you try to move the helmet.
* The Sy-Max and CL-Max were designed to be used in the closed chin bar position, thus be sure all helmet “fitting” is done while chin bar is in the closed and locked position.
- Fasten the retention system (chin strap) as tight as possible under your jaw without causing pain. There must be no slack in the strap, and the strap must be tight up against your jaw. Click to view the helmet retention system.
- Test the retention system (chin strap)<>
Put your hands on the back of the helmet and try to push the helmet off by rotating it forward.
Put your hands on the front of the helmet above your forehead (or on the chin guard) and try to push the helmet off by rotating backward.
If helmet comes off, try another size or another model or brand.
Repeat steps 3 through 8 until you find a helmet that fits your head snugly and securely.
