|
|
 |
Call/Txt for Personalized Sales:
(206)251-8313 |
|
|
|
|
|
|
|
|
The HJC HJ-09 Anti-Fog and RST-Mirrored shields for CL-17 Helmets.... [more]$24 99 - $34 99Save $0.00(0%) Ships Same Day! | Authorized Reseller | Call for Personalized Quote on Packages! Color Selection: Select Color Below $2999 Save $0.00(0%) Ships Same Day! | Authorized Reseller | Call for Personalized Quote on Packages!  Verified In Stock - Ready To Ship! Color Selection: Anti-Scratch Dark Smoke $2499 Save $0.00(0%) Ships Same Day! | Authorized Reseller | Call for Personalized Quote on Packages! Verified In Stock - Ready To Ship! Color Selection: Anti-Scratch Clear $2499 Save $0.00(0%) Ships Same Day! | Authorized Reseller | Call for Personalized Quote on Packages! Verified In Stock - Ready To Ship! Color Selection: Anti-Scratch Smoke $3499 Save $0.00(0%) Ships Same Day! | Authorized Reseller | Call for Personalized Quote on Packages! Verified In Stock - Ready To Ship! Color Selection: RST-Mirrored Blue $3499 Save $0.00(0%) Ships Same Day! | Authorized Reseller | Call for Personalized Quote on Packages! Verified In Stock - Ready To Ship! Color Selection: RST-Mirrored Silver $3499 Save $0.00(0%) Ships Same Day! | Authorized Reseller | Call for Personalized Quote on Packages! Verified In Stock - Ready To Ship! Color Selection: RST-Mirrored Gold 
|
|
|
HJC HJ 09 Face Shield CL 17 HelmetsThe HJC CL-17 replacement shield is the HJ-09. The Anti-Scratch Pinlock ready shields are a 3D design and provide 95% UV protection, while RST-Mirrored shields do not have a UV specification.
The HJ-09 shields have posts for Tear-Off film and pins for an Anti-fog insert film (film and inserts are sold separately).
The RPHA Pro 11 and the RPHA 70ST 2D shields have a single horizontal curvature, allowing tear-off films to easily stretched across the surface without warping, while the 3D shield on the CL-17 helmets has both horizontal and vertical curvatures. So if you have a tear off film for an RPHA helmet, it will not fit the CL-17. Item Fits the following helmets:
HJC HJ-09 Shield Care for CL-17 Helmets
Cleaning:
HJC does not recommend cleaning any CL-17 shield with spray on type chemical cleaners. A reaction between a shield and cleaning chemical is possible, resulting in haze build-up and distortion. HJC recommends washing the HJ-09 visor with WARM WATER AND A SOFT CLOTH ONLY. We also recommend cleaning the HJ-09 shield as soon as possible after dirt and debris have accumulated. Do not let debris sit on the shield for any extended period of time. If debris has accumulated over time, it is recommended to clean the shield in several applications. This allows the debris to break down with every application. Excessive rubbing can lead to scratching as the hard debris can act as a scuffing agent. The same can occur if low-grade rigid paper towels are used. |
| |
Anti-Fog Inserts:
Aftermarket anti-fog inserts such as Fog City and HJTech Anti-Fog can work very well with HJC flat (2D) shields. These inserts are not recommended for use with standard HJC 3 dimensional (3D) shields due to their double curvature shape which could cause a distortion of vision. Follow the installation instructions diligently. |
| |
Rain-X & Other Products:
Applying Rain-X or other water dispersing type chemicals work well on HJC shields (except RST mirrored shields) if applied on new shields and if the chemical companies directions are followed diligently. Always use extremely soft and clean clothes for applications. |
| |
HJC Anti-fog Treated Shields (HJ-09):
HJC's anti-fog treated shields are anti-fog coated both on the inside and hard coated outside. When first using the anti-fog HJ-09, you must activate the anti-fog by breathing directly on to the shields interior surface. The shield will partially fog, once the fog clears it is activated. You will notice if you breathe on the shields again, it remains fog free. All anti-fog coatings are a chemical treatment and will wear off in time. |
| |
RST Mirrored Shields:
HJC does not recommend using any chemical products on our RST mirrored shields as they will degrade the mirror finish. For cleaning, we recommend washing the shield with warm water and the soft cloth only. We also recommend cleaning the shield as soon as possible after dirt and debris have accumulated. Do not let debris sit on the shield for any extended period of time. If debris has accumulated over time, it is recommended to clean the shield in several applications. This allows the debris to weaken and break up with every application. Excessive rubbing can lead to scratching as the hard debris will act as a scuffing agent. |
|
|
|
|
|
